|
Task |
IOS Commands |
|
Enter global configuration mode. |
S1# configure terminal |
|
Enter interface configuration mode for the SVI. |
S1(config)# interface vlan 99 |
|
Configure the management interface IPv4 address. |
S1(config-if)# ip address 172.17.99.11 255.255.255.0 |
|
Configure the management interface IPv6 address |
S1(config-if)# ipv6 address 2001:db8:acad:99::1/64 |
|
Enable the management interface. |
S1(config-if)# no shutdown |
|
Return to the privileged EXEC mode. |
S1(config-if)# end |
This Configures your VLAN, however you still need to let the VLAN know the gateway to get out of the Network
Commands Go Here
Also an example of an interface that is not a physical port